Contact our team to get all your questions answered
The IO12F01KNX device integrates 12 relay outputs from 16 A – 230 V AC and also includes 12 inputs for dry contacts (potential-free).
The IO12F01KNX-SD version includes a microSD card reader with which you can save the programming of the device and restore it to an identical device, avoiding field programming or allowing a quick recovery in the event of a failure.
The outputs can be configured as:
• 12 outputs for light / load control
• 12 channels for valve in PWM (solenoid actuators)
• 6 channels for roller shutter / venetian control
• 6 channels for 3-point valve control
• 3 fan coil actuators 2-pipes
• 2 fan coil actuators 4-pipes
The device also has 12 inputs that can be connected to buttons, switches, or be configured as outputs to activate individual signal LEDs (see eelectron LEDs code LD00A01ACC / LD00A11ACC) and can be used for on/off commands, dimming, shutters or blinds / scenarios, sequences, stepper commands, etc.
• 4 inputs (out of the 12 available) can be configured as analogue for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus. It is also possible to enable 3 complete thermostat modules combined with inputs 1, 2 and 7.
• Input 2 can be enabled as a thermostat if inputs 3÷6 are not used; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment.
Equipped with KNX communication interface.
You can also combine 2 or 3 relays with logic interlock for controlling 4-pipe / 3-speed fan coils or combine relay groups (up to 6) for special functions with logic interlock. Is intended for installation on DIN rail in LV distribution switchboards.
For a better experience, rotate the screen horizontally.
| Code | Image | Type | Color | Channels |
|---|---|---|---|---|
| IO12F01KNX-SD |
|
-
|
-
|
- |
| IO04F01KNX-SD |
|
-
|
-
|
- |
| IO08F01KNX-SD |
|
-
|
-
|
- |
| IO16F01KNX-SD |
|
-
|
-
|
- |