Knx 8-channel Actuator
Code:IO08F01KNX
Code:IO08F01KNX
Universal DIN module 8 IN / 8 OUT plus
Device IO08F01KNX is a DIN rail EIB / KNX actuators with 8 relay outputs that can be configured as:
– 8 outputs for light / load control
– 8 channels for valve in PWM (solenoid actuators)
– 4 channels for roller shutter / venetian control
– 4 channels for 3-point valve control
– 2 fan coil actuators 2-pipes
It is also possible to combine 2 or 3 relays with logic interlock for 4-pipe / 3-speed fan coil control or combine groups of relays (up to 8) for special function using logic interlock .
The device also includes 8 inputs that can be connected to pushbuttons, switches, or be configured as outputs to activate individual signalling LEDs (eelectron code LD00A01ACC / LD00A11ACC) and can be used for on / off, dimming, shutters or venetian blinds / scenarios, sequences, step-by-step commands, etc. 4 inputs (of the 8) are configurable as analogue for the connection of NTC temperature probes (see probes eelectron code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on / off controls (e.g. thermo furniture).
It is also possible to enable 2 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.
Version IO08F01KNX-SD includes a microSD card reader includes a microSD card with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.
The KNX Domotic installations for building automation Eelectron, developed on KNX protocol, are intelligent custom home automation systems for automation and energy saving in buildings; the product range with Made in Italy is designed for residential, hotel and building applications.
Contact us for information about the KNX 4 channel actuators, Knx 8-channel Actuator, Knx 24 channel Actuator, KNX dimmer actuator or KNX Universal Interfaces.